Mon 29th April 2019
I got to work early, emptied out the lazarette locker all over the cockpit and dived below to dismantle the steering system. Back in the cockpit, I fully dismantled the wheel , sprocket and all the other bits, it seemed sensible to check everything while it was in bits. One thing I spotted when I took it all apart was that the key, which is actually just a block of metal, was missing from the wheel shaft, it locks the wheel to the sprocket and without it all the force of the steering is transferred to a small bolt used to stop the wheel sliding out.
I looked around in case it had fallen out, but I wasn’t surprised it was missing, that explained the extra play in the steering I wanted to eliminate. It was worrying that the bolt could have snapped at any moment we had any rough weather and the steering got heavy. If the bolt snapped, I would be spinning the wheel with no effect, worse if I pulled back the wheel would have popped out of the pedestal all together, and whilst making a great photo opportunity, it might have been a bit upsetting for whoever was on the helm. Whilst relieved it hadn’t been a problem, I decided to get a key made from the workshop.
It turns out, that the worst case scenario for the sheave failure played out with another member of the baba group who tells me they lost all steering and if they hadn’t had an emergency tiller handy, they may well have ended up on the rocks!
I had removed all the bits on the pedestal including the fold up table which I now started to strip the varnish off, along with the main cabin hatch screens.
Tuesday arrived and I took the broken sheaves up to the local workshop for welding, ordered a new bit of key to be cut, and cycled on into town (town being the other end of the only main road with the co-op and baker as the only shops) for supplies, I climbed back into the lazarette and removed the quadrant from the rudder as it was looking a bit rough, I gave the inside a good cleaning and replaced some of the earthing wires that had corroded. I also checked all the sea cocks and hoses for any sign of wear.
Wednesday, I was crippled, crawling around upside down, inside out, in the locker, is really more of a job for houdini than me, so did some gentle varnishing instead. I have half a tin of very high quality Epiphanes varnish, but it’s over a year since I last opened that tin, and for some reason it doesn’t seem to keep well. But I’m too mean to throw it away, instead I filter the lumps out with a sieve, then add thinner to bring it back to life. It seems to be working well after that.
In the office I help Randy and his wife out getting openCPN running on their macbook, it seems to work well for them. Later Randy calls round with a bag of giant prawns for me.
The thing is they’re still all alive and wriggling around in the plastic carrier bag. This is not something I’m used too, and although I know how to snap their heads off and peel the shell, even de-veining is easy, I’m not keen on doing it while they are looking at me, or watching me kill their mate looking up from the bag. So I put dinner off to a bit later and put the bag in the sink. All the time I can hear them climbing over each other, and I’m working but thinking Im going to have to man up at some point and do the deed. I wait a little longer, and fortunately they seem to have gone to sleep. Just as well, as ten minutes later they are lovely pink lumps of flesh frying in garlic butter, very tasty too.
Thursday, I popped back to the workshop and collected the sheaves. The welding is just fine and the new key looked great, I noticed a sailboat similar to mine hauled up on the trolley at the workshop and realised that they can haul me out here if needed, that gives me more fleibility
I had to file the key down a little to make it fit, but now it’s very snug. and I felt smug for fixing a major defect!
Ron, over the water on the next pontoon, who had promised me a properly cooked crab shouted over that he would take me out fishing in a few days if I wanted to learn. Even as a master fisherman already, with two catches over the last ten years, I thought it would be rude to say no, so I’m looking forward to that.
I also popped into the post office and found a letter for me had just arrived, it was my AT&T sim card I had ordered, not sure if it would work or be a dud like the last one I ordered online ,I was keen to try it out. I had to hand over the dosh for the first month online before I would find out, and the unlimited data on 4g anywhere in Canada/USA & Mexico for $65 / month sounded like a good deal. It would be a good deal, but they dont allow tethering/hot-spot outside of the USA, that’s buried in the small print. So I have lots of data, but only on the phone, so it’s not that great. However I should be able to do lots of skype/facetime stuff now without any worries about running out of data.
At some point in the week a house motored on into the harbour and starting filling its hull ( basement?) with lumber. So I have seen planes and houses tie up to the same dock as me now, what a place!
I did find out today that Newfoundland is 3:30 behind UTC/GMT. I can never understand why anyone would do this, do they know how much of a pain this is for their computer programmers, if they have any left. I couldn’t cope with that. I had wondered why they kept saying 0n cbc, and the news is at news at 11, or 11:30 in Newfoundland, I wondered why theirs was always later, silly me.
Friday, put all the steering system together and was feeling good about things, when I decided to clean more of the lazarette area. the eberspacher (diesel fired cabin heater) exhaust pipe had a soot mark behind it on the hull, in the area I had repaired back in Borneo. I tried to pull the pipe away from the hull to look at it and it crumbled in my hand with black soot and chunks of sooty matter going everywhere. Not good. There’s also an asbestossy looking material lagging the pipe inside an outer plastic casing. I’m hoping that’s ok. So after an hour of cleaning up and cutting the pipe back, I’m in need of a new exhaust pipe, which may not be easy to get here, before I can use the heater. Not to worry I have the electric one, oh I forgot, they’re shutting off the power to the marina over the next few days. Let’s hope this promise of warmer weather comes through.
Saturday, walk downtown to the shop and buy a fresh sourdough loaf.
More varnishing, and realise I forgot a clip in the steering brake, so take it all apart again. I try to connect the throttle up and it is out by an inch from where the coupling should be, realise I put a bracket securing the cable in upside down (in fact I put it in the right way, they wanted it to be put in upside down, but that’s a small point 😉 ) So more stripping down and putting it back together. I think it’s almost done now, just need to get the block of wood under the compass varnished.
The battery charger stopped working, so I have been using the solar panels for the last few days. I decided to fix it today and noticed the cables had corroded off. I’m very confused, this is the second time in a year they have corroded off at the switch panel, I wonder if this fine malaysian cable has some problem. Once I had repaired the connections to the switch panel, it wouldn’t power up, I remember it did this before, after a while it started working, it’s like it’s sulky and will only work when it wants to.
So I think I’m close to starting on the engine work, however I went looking for the cooling pump repair kit and I can’t find it. This is the only real fault on the boat, and it’s the reason I bought this as soon as I got home in October, I packed it as soon as it arrived and I can’t remember unpacking it a few weeks ago when I arrived back at the boat. This really is a case of ‘you had one job’ I’m mad about this, did I unpack it and put it ‘somewhere safe’ here, it’s not that big a boat, but I have searched it stem to stern, twice now.
I know as soon as I order a replacement it will turn up. Such a nuisance. I may have wrapped it up inside a tee shirt for extra protection, and it will fall out when we hit tee-shirt weather, losing my memory is one thing I’m not happy about at all. On the plus side, I did find loads of great stuff I had forgot we had hidden in odd places all over the boat, however I can’t remember what they where a day later 🙁
Leaving the cockpit yesterday I tripped and bashed my knee hard, I realised I had to tidy up, and so moved a lot of crap out of the cockpit and threw a lot away. Underneath all the crap in the area where I had left the steering wheel, I found the original key for the wheel. ! Oh well.
Paul Collister